evo 2600

Radar Level Gauge

Combustion Controls

Combining the latest advances in High-Tech research and development with years of field-proven experience, you are assured of a top quality, reliable and durable system capable of withstanding even the harshest of environments.

Hydraulic Controllers

Designed to operate efficiently with low BTU anaerobic digester waste gases

Hydraulic Power Packs

Designed to operate efficiently with low BTU anaerobic digester waste gases

Hydraulic Actuators

Designed to operate efficiently with low BTU anaerobic digester waste gases

Position Transmitters

Designed to operate efficiently with low BTU anaerobic digester waste gases

Hydraulic Controllers

13110 Hydraulic Controller

Designed for applications where a group of controllers are supplied from a separate, but common power supply

13120 Hydraulic Controller

Designed for any control system applications that require high performance hydraulic control or continuous servo valve actuation

13141 Integral Hydraulic Controller

Integral Power Supply
Pressures up to 930 psi
5.8 to 14.1 GPM
3 to 7.5 Horsepower power supply

13181 Integral Hydraulic Controller

Integral Power Supply
Pressures up to 1000 psi
10 to 40 GPM

13190-13590 Proportional-Speed Floating Control

Integral Motor / Pump
Low Inertia / Torque Ratio
Same options as 13×10 Models

13210 Hydraulic Controller

Designed for slow-reacting control applications that require stability

13310 Proportional-Speed Floating/Span Adjustment

Proportional Control
Pressure, DP, or Electronic Input
Uses Common Power Supply

13410 Proportional Plus Reset Control

Proportional Adjustable Ration Control
Pressure, DP, or Electronic Input
Uses Common Power Supply

Hydraulic Power Packs

19111 Hydraulic Power Supply

Designed to meet JIC standards
Sturdy reservoir elevated for maximum heat dissipation
3/4 to 3 horsepower

19140 Hydraulic Power Supply

5 Gallon Reservoir
125 to 230 PSI
Mounting for 2 Controllers

19140/13120 Hydraulic Power Supply and Controller

10 Gallon Reservoir Eliminates the Need for Heat Exchanger
Pressure, Filter, and Level / Temperature Switches
Meets JIC Standards

19150 Hydraulic Power Supply

Meets JIC Standards
5 to 15 Horsepower
500 to 900 PSI
60 Gallon Reservoir

Hydraulic Actuators

14110 Straight Type Cylinder

Single End
Low By-Pass Leakage
1 1/2″ – 8″ Bore
Bronze Bearings

14120 Hydraulic Power Supply

Double End
Low By-Pass Leakage
1 1/2″ – 8″ Bore
Bronze Bearings

14130 Crank Type Cylinder

3″ and 3 1/2″ Sizes
Full 90 Degree Rotation
Optional Manual Operator
Average Output Torque 2760
in. lbs. to 3750 in. lbs.

14140 Crank Type Cylinder

5″ Sizes
Full 90 Degree Rotation
Average Output Torque 13,300 in. lbs.
Available with Pilot Valve

Position Transmitters

31490 Rotary Position Transmitter

A potentiometer type transmitter which transmits field information to a remote point

31590 Linear Position Transmitter

A heavy-duty assembly packaged for industrial on-line applications