evo 2600

Radar Level Gauge

Safety Equipment in Methanol Systems

With a complete line of Digester Cover Equipment, Shand & Jurs Biogas manufactures a complete line of digester gas safety, gas train equipment for municipal treatment, food processing, landfill, brewery and dairy applications.

Conservation Vents

Designed to operate efficiently with low BTU anaerobic digester waste gases

Arresters

Designed to operate efficiently with low BTU anaerobic digester waste gases

Tank Blanketing

Designed to operate efficiently with low BTU anaerobic digester waste gases

Emergency Vent and Manhole Cover

Provides an in-line barrier against flame flashback in small gas lines.

Conservation Vents

94020 Conservation Vent (Pressure /Vacuum)

Typically SS pressure/vacuum conservation vents on methanol tank covers

94160 Pressure Relief Vent

Pressure Relief Vent provides pressure relief for storage tanks and low pressure vessels

Arresters

94306 Vertical Flame Arrester

End of Line and In-Line Protection of Atmospheric Ignition

94406 Vertical Inline Deflagration Flame Arrester

End of Line and In-Line Protection of Atmospheric Ignition

94407 Horizontal Inline Deflagration Flame Arrester

End of Line and In-Line Protection of Atmospheric Ignition

94311, 94312, 94313, 94314 Detonation Flame Arresters

Provide protection against flame propagation through piping runs and vapor recovery systems, while allowing maximum flow efficiencies

94560 Combination Conservation Vent and Flame Arrester (2"- 4" Sizes)

The Shand & Jurs Model 94560 Combination Valve and Flame Arrester design provides for maximum flow capacity, minimum leakage and a positive flame stop on low pressure tanks containing flammable liquids or solvents having low flash points

Tank Blanketing

94270 Vapor Guard Tank Blanketing Valve

Gas blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents

Emergency Vent and Manhole Cover

94200 Emergency Vent and Manhole Cover

Emergency Vent and Manhole Cover incorporates emergency relieving with access into tanks

L&J Technologies or any of it’s subsidiaries assume no responsibility and shall not be liable for any damage, injury or death caused by the mis-application or improper installation of the products that it provides. Installation shall be per manufacturer’s instructions in accordance to any applicable local, state or federal regulations. It is the responsibility of the purchaser to ensure these guidelines are followed and that the products are applied properly.

Safety Equipment in Methanol Systems

Conservation Vents

Arresters

Tank Blanketing

Emergency Vent and Manhole Cover

Conservation Vents

94020 Conservation Vent (Pressure /Vacuum)

94160 Pressure Relief Vent

Arresters

94306 Vertical Flame Arrester

94406 Vertical Inline Deflagration Flame Arrester

94407 Horizontal Inline Deflagration Flame Arrester

94311, 94312, 94313, 94314 Detonation Flame Arresters

94560 Combination Conservation Vent and Flame Arrester (2"- 4" Sizes)

Tank Blanketing

94270 Vapor Guard Tank Blanketing Valve

Emergency Vent and Manhole Cover

94200 Emergency Vent and Manhole Cover

L&J Technologies Corporate Headquarters