The Shand & Jurs 94520 Emergency Vent provides emergency venting and manhole requirements, where intermediate pressure relief beyond that provided by tank conservation vents is required. This vent is not intended to meet requirements of explosion relief, but is designed to relieve excessive internal pressure. It is a economical solution to costly and dangerous tank roof rupture problems.
The 94520 is available in 10”, 16” and 20” sizes and is designed to utilize a patented, magnetic latch system, which provides greater flow capacities than conventional weight loaded vents. It also provides for 100% opening at set pressure with no overpressure required. The magnetic latching principle eliminates hundred of pounds of loading weights required by conventionally loaded vents. The vent is tightly latched utilizing permanent magnets, which are mounted to the vent cover and act on a magnetic stainless steel plate on the vent base. As the pressure increases, the magnetic attraction between the base and cover remains constant, until the set pressure is reached. The setting is determined by the size and strength of the magnets.
Since the force required to overcome the magnets is much greater than the force (or pressure) required to support the lightweight cover, the vent immediately goes to full open at the set pressure. There is no “simmering” or leakage as the tank pressure approaches set pressure.
The vent cover is prevented from opening more than 90° via spring loaded cables. These cables are attached to the cover and the vent body. This will assure the cover to self close once fully opened.
Shand & Jurs “Expanda-Seal” option is available on all pressure pallet assemblies. This feature significantly reduces leakage. The ballooning effect of the Teflon diaphragm effectively seals the valve.