The MCG 1095 Wireless High Level Alarm Probe brings state of the art technology to overfill protection- it is the only probe on the market with complete self testing! The competitors systems typically only check the wiring and probe electronics. The MCG 1095 includes a solenoid to physically move the displacer as an actual level would. In keeping with the L&J tradition, the MCG 1095 has gone a step further than the competition in providing high reliability and low maintenance. The MCG 1095 offers the most reliable protection available against dangerous and costly overfills.
Typically, a high level alarm probe is mounted in a poor environment and sits inactive for years at a time. This makes regularly scheduled testing the most important factor in reliability. The remote self-testing feature of the MCG 1095 makes regular testing of the probe easy and convenient. If coupled with the L&J MCG 7000 and MCG 7030 Alarm System, all probes can be automatically tested at pre-programmed intervals, complete with a printout of probe conditions.
The MCG 1095 needs no wires at all. It contains a Lithium battery which will totally power the unit for at least 1 year. Using L&J proprietary algorithms, it instantaneously sends back any alarm conditions as well as continually checking battery conditions and probe electronics. If the battery should get low or any other abnormal condition should occur, it will immediately notify the host.
Remote Data Acquisition
For a complete alarm system the MCG 1095 probe is coupled to the MCG 7000 or MCG 7030 Alarm System. The MCG 7000 and MCG 7030 provides automatic self-checking, printouts and discrete outputs for horns, emergency shut-off, as well as an optional communications port.