Shand & Jurs. We supply industrial  Wastewater Equipment Make Shand & Jurs Biogas Your #1 supplier of industrial Wastewater Equipment. L&J Technologies


L&J Technologies
S&J BioGas

Products:
Digester Cover Equ.
  P/V Vent
  3-Way Selector Valve
  ManWay
  Emergency Vents
  Inspection Hatch
  Cover Position Indicator
  1800 Radar

Digester Safety Equ.
  Drip Traps
  Sediment Traps
  Check Valves
  Detonation Arresters
  Flame Traps
  Back Pressure Regulators
  Pressure & Flame Traps
  Gas Purifiers
  Foam Separtors
  Condensate
    Accumulator

  Manometers

Waste Gas Burners/Flares
  Burners
  Enclosed Flare
  Explosion Relief Vent
  Flame Check


PDF's
Site Map

Search: Shand&Jurs Biogas




Companies:
 Delavan
 Durlam
 GPE
 L&J Engineering
 Omnitrol
 Shand&Jurs
 Shand&Jurs BioGas


L&J Technologies is ISO 9001 Registered

Shand & Jurs Biogas
97141 Flame Trap Assembly (Plate Flame Arrester)


Shand & Jurs Biogas 97141 Flame Trap Assembly (Plate Flame Arrester)
  • Positive Emergency Shutoff
  • Inhibits Flame Propagation
  • 255°F Fusible Link
  • Sizes 2” Through 12”
  • Horizontal or Vertical Mounting Options


The S & J Biogas 97141 Flame Trap Assembly combines the 97130 thermal operated valve with the 94309 plate flame arrester to effectively inhibit flame propagation in low pressure gas lines.

The flame arrester quenches the flame front by cooling the flame below its ignition temperature. The flame front enters the arrester and the flame is intercepted by the arrester element which is specifically designed to provide a precision path for the flame to follow. The flame front temperature is reduced to below the ignition point of the protected vapors. This is achieved by dissipating the heat of the flame through the arrester elements and body. The spring loaded thermal valve quickly closes when the fusible link is melted in the presence of fire. This shuts off the flow of gas to prevent catastrophic damage.

The fusible element is easily replaced without disassembling the valve. Other valve elements are also easy to replace which simplifies maintenance.

Its aluminum and stainless steel components withstand the severest of process environments. The S & J Biogas 97141 is especially designed for hydrogen sulfide and hot, wet methane which are the main components of digester gas streams in municipal waste water treatment facilities.

The 97141 is 100% U.S. made.



S&J Biogas
©Copyright L&J Technologies 2008