|
S & J Biogas 97110 Automatic Drip Trap provides for the
continuous, safe removal of condensate from low points in low pressure gas
piping systems. Removing condensed liquid protects the piping and equipment
from corrosion and "water hammer" damage.
The unit collects liquid until the
float lifts the stopper valve off of its seat and begins to drain the liquid.
As the level drops, the float rotates the stopper valve back into its seat and
provides a tight seal. A liquid level is always maintained above the outlet
while the unit is draining which prevents any release of gas.
High and low
pressure rated units allow for use in any low area of the digester gas system.
Available with a 2 quart capacity and with 1" NPT inlets and outlets,
the S & J Biogas 97110 adapts to any condensation or drainage collection requirement.
Its aluminum and stainless steel components withstand the severest of process
environments. The S&J Biogas 97110 is especially designed for hydrogen sulfide and
hot, wet methane which are the main components of digester gas streams in
municipal waste water treatment facilities.
The 97110 is 100% U.S. made. |
Download PDF Brochure
