Shand & Jurs. We supply industrial safety relief valves, tank fittings We supply industrial safety relief valves, tank fittings. L&J Technologies


L&J Technologies
S&J Home

Products:
Flame Control
Tape Gauges
 Gauges
 Accessory
Tank Valves
 Conservation
 Pilot
Tank Vents
 Pressure
 Vacuum
 Free
 Emergency Vents
Manhole Covers
Gauge Hatches
Safety Valves
Swing-Line
Vapor/Blanket
Steam Jacketed Valves
Hydraulics

PDF's
Site Map

Search: Shand&Jurs




Companies:
 Delavan
 Durlam
 GPE
 L&J Engineering
 Omnitrol
 Shand&Jurs
 Shand&Jurs BioGas




L&J Technologies is ISO 9001 Registered

Shand & Jurs
94261 Vapor Recovery Regulator


Shand & Jurs 94261 Vapor Recovery Regulator
  • Operates within 1/10"w.c. from operating ranges of 1/10" w.c. to 2" w.c.
  • Reduced number of moving parts maximizes service life
  • No external power source required
  • Can provide four types of service:
    1. Pressure increase
    2. Vacuum increase
    3. Pressure decrease
    4. Vacuum decrease


The Shand & Jurs Model 94261 Vapor Recovery Regulator is a float-operated pressure regulator utilizing a weight balanced float to establish a set point. This highly accurate and extremely sensitive regulator is used to maintain close pressure control of low pressure tanks and meets requirements for vapor recovery.

The primary purpose of this vent is to conserve vapor loss before atmospheric venting or to provide a closed venting system. It has the capacity of providing simple adjustment of set points by adding or removing weights.

Model 94261 is a totally self-actuated regulator requiring no outside source of energy for its operation. A straight forward mechanical design using a minimum of moving parts provides for long service life with minimum maintenance.
94261_figab.gif In Fig. A when positive pressure above set point exists in the tank, it allows gas vapors to be moved. At this point, the gas pressure in space with atmosphere pressure in S1, will raise the valve assembly and permit vapor flow from the tank to a recovery system. In Fig. B. when negative pressure (vacuum condition) below set point exists in the tank, it allows gas vapor to flow into the tank. Negative pressure from the tank vapor space enters the control line in the regulator space S1, with atmosphere pressure in S2, will lift the valve assembly allowing vapor flow into the tank.



Shand&Jurs
©Copyright L&J Technologies 2008