|
Peace of Mind
The MCG 7000 Series High Level Alarm System offers complete remote self-checking of alarm probes through
cutting-edge technology that makes the system accurate, extremely reliable and fully compatible with most
commercially available level alarm switches.
The MCG 7000 meets all the requirements of an independent, overall alarm system; it even includes an optional battery
pack and charger to operate the system during power outages. In fact, when coupled with an existing gauging or
SCADA system, the MCG 7000 can also function as an alarm data acquisition station.
Up to 128 separate alarm probes can be monitored by the MCG 7000 using a single, 4 wire data highway. If the system
is used as a controller, it can monitor 48 individually wired alarm probes. The system uses an 80 character LCD to provide
immediate alarm data, and a paper tape printer to automatically print alarms as they occur, and for output of a daily event
log.
Versatility
The MCG 7000 also offers two communication ports. With the 4-wire data highway port, the MCG 7000 becomes a remote
alarm data acquisition device and can pass alarm data to the gauging and/or SCADA system along existing field wiring.
With the RS232 serial port, the MCG 7000 can be interfaced to any device or host computer using standard ASCII
protocol.
Remote Reporting
The addition of a modem to the RS232 port allows any number of MCG 7000s to be linked to a central monitoring of alarms
from even the most remote location. While most commercially available level alarm switches can be used with the MCG
7000, the system can only provide complete self-checking when coupled with the L&J Engineering MCG 1090 Alarm
Probe or with the L&J Engineering MCG 1095 Wireless Alarm Probe.
|
Download PDF Brochure