MCG 2000SFI UPGRADE KITS
These kits permit L&J Engineering customers to upgrade their transmitter
technology to the new Smart Flash Infrared, or SFI, technology. The upgrade
kit varies depending upon the existing transmitter model as described below:
The following is for L&J Tankway, level, and Spot Temp. For any other
configurations consult factory i.e. 4-20MA out. All upgrades will require an
MCG 2150 to program the SFI in the field
| Part NO. |
Description |
| 810915 |
MCG 2000SS/2000SSI to MCG 2000SFI (Reuse Existing Dome)
This kit consists of a new MCG 2000 SFI CPU PCB with new
LCD Display. The upgrade from MCG 2000SS/SSI entails merely
swapping out the old electronics with the new SFI electronics.
Note: For the 2000 SS upgrade, the existing dome is re-used but does
not have a glass portal to permit the infrared functions to be used
while the dome is in place. All of the other SFI functions are enabled
with the dome in place. Reuse existing optical encoder. |
| 810962 |
Same as above, but includes optical encoder. |
| 810959 |
MCG 2000SS to MCG 2000SFI - NEW DOME WITH GLASS PORTAL
This kit includes a new MCG 2000 SFI CPU PCB with new LCD
display and a new dome with a glass portal. The upgrade from
MCG 2000SS entails merely swapping out the old electronics with
the new SFI electronics. A new dome is provided with a glass portal
to permit the infrared functions to be used while the dome is in place.
Consult factory for transmitters purchased prior to 1987. Reuse existing
optical encoder. |
| 810960 |
MCG 2000SFI UPGRADE UTILIZING EXISTING GPE 31422/31423 HOUSING
This kit includes new MCG 2000 SFI CPU PCB with new LCD
display along with all necessary hardware to upgrade existing GPE
transmitters to SFI technology. Existing GPE transmitter PCB's and
potentiometers are replaced with 2000 SFI CPU, LCD display and
absolute optical encoder all in customers existing GPE transmitter
housing. |
| |
MCG 2000SFI UPGRADE USING EXISTING
OPTICAL ENCODER
(Includes new housing)
This kit includes all components of MCG 2000 SFI transmitters
except the optical encoder. Kit contains new MCG 2000 SFI
housing with glass portal dome as well as new 2000 SFI CPU PCB,
LCD display, condulet PCB and cable. Customer will use optical
encoder from existing L & J transmitter.
|
|
