| SPECIFICATIONS |
| Measuring Principle: |
FMCW Radar |
| Range: |
0-75 (23m) feet
Standard.
Up to 180 feet
(55m) optional
|
| Accuracy: |
+/-0.5mm* |
| Resolution: |
.1 mm |
| Radar Power: |
Less than 1mw (0dBm) |
| Electronics Temperature: |
-40º F to 150º F
(-40ºC to +65º C) |
| Product Temperature: |
-148º F to 482º F
(-100º C to 250º C) |
| Local Display: |
2 line, 80 Character LCD |
| Optional Remote Display: |
Ground Level Display
(4 line 80 LCD) |
| Communications: |
L&J "Tankway" (standard)
Up to 128 MCG field devices
Other Mfgrs. Protocols
|
| I/O Option: |
Two 4-20mA Outputs
Two 4-20 mA Inputs |
| Temp Option: |
Single or dual RTD
Temp Avg. Probe (CU/PT) |
| Control Options: |
2 points, 4 contacts |
| Power: |
110VAC, 240VAC,
24VDC, 10W
Other voltages available
|
| Lightning Protection: |
Comprehensive Surge
Protection Standard |
| Max. Pressure: |
150PSIG (or 300PSIG optional) |
| Construction: |
Cast Aluminum Std.
Stainless Steel Opt. |
| Mounting: |
2" NPT
Standard, Others
Optional including DIN and JIS/TD>
|
| Weight: |
8 lbs. - AL |
| Safety Approvals: |
Explosion Proof/ **Intrinsically Safe Temp.,
Class I, Div. 1,
Group B, C & D, UL, CUL
Approved, FCC APPROVED |
| Antennas: |
Parabolic, Cone, Rod, Stillwell |
| *depends on installation, application, type of
antenna and product dielectric properties
|
| **requires MCG 2350 accessory |
|
All designs subject to change. Certified
dimensions and specifications available upon request.
|
Simple Plug-In Modules
Part of L&J Engineering's expertise lies in its flexibility
and ability to emulate competitive protocols therefore allowing L&J
equipment to interface with non-L&J field equipment.
|
The software protocol or actual bit structure of the data is
programmed into the on-board logic chip. Several different software protocols
can be programmed in the same unit.
The hardware for the specific interface protocol (i.e.
RS232,RS485,Tankway™, etc.) is provided in a plug-in module. This allows a
customer to replace his existing system over several phases (if required). For
example, a customer can immediately replace his existing non-L&J gauge with
an MCG 1600SFI Series Radar Gauge containing the appropriate interface module.
At a later date, when the entire system is replaced by an L&J system, the
old interface module can be replaced with a Tankway™ module.
|
Download PDF Brochure