• Wireless communication
• Meets State fire codes for independent alarms
• True complete self test (optional)
• Reliable protection due to simplified mechanics
• Optional discrete in allows other alarm conditions to be sent back
• Solar/Battery
• Battery only

Reliable Protection... the only probe on the market with full self testing
The MCG 1095 Wireless High Level Alarm Probe brings high technology to over fill protection. The competitors system typically check the wiring and probe electronics. The MCG 1095 also includes a solenoid to physically move the displacer as an actual level would. In keeping with the L&J tradition, the MCG 1095 has gone a step further than the competition in providing high reliability and low maintenance. The MCG 1095 offers the most reliable protection available against dangerous and costly over fills.

Remote Self-Checking
Typically, a high level alarm probe is mounted in a poor environment and sits inactive for years at a time. This makes regularly scheduled testing the most important factor in reliability. The optional remote self-testing feature of the MCG 1095 makes regular testing of the probe easy and convenient. If coupled with the L&J MCG 7000 Alarm System, all probes can be automatically tested at pre-programmed intervals, complete with a printout of probe conditions.

Battery Operation
The MCG 1095 needs no wires at all. It contains a Lithium battery which will totally power the unit for at least 1 year. Using L&J proprietary algorithms, it instantaneously sends back any alarm conditions as well as continually checking battery conditions and probe electronics. If the battery should get low or any other abnormal condition, it will immediately notify the host.

Remote Data Acquisition
Additional dry contacts can be connected to the optional inputs to allow alarm conditions from other equipment to also be sent back. For a complete alarm system the MCG 1095 probe can be coupled to the MCG 7000 Alarm System. To configure a full wireless system, use L&J’s MCG 7000 (with wireless option) and the MCG 5102 Wireless Base Station. The MCG 7000 provides automatic self-checking, printouts, and discrete outputs for horns, emergency shut-off, etc., as well as an optional communications port. The MCG 1095 can be configured with the standard L&J 4-Wire Data Highway port to provide remote alarm data acquisition for your gauging and/or SCADA system MCG 3900.